DIFFERENTIAL RING AND PINION FOR DANA 30 FRONT AND DANA 35 REAR - RING AND PINIONS INCLUDING TIMKEN BEARING KITS; 4.10 RATIO; REQUIRES 3.73 AND HIGHER FRONT CARRIER; REQUIRES 3.54 AND HIGHER REAR CARRIER; IF CURRENTLY USING A 3.54 RATIO YOU
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner's circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.
Information:
JEEP TJ NON-RUBICON DANA 30F/35R 4.10Application Summary:
| Year | Make/Model |
|---|---|
| 1997-2006 | Jeep TJ |
| 1997-2006 | Jeep Wrangler |
This item is a package with the following components:
| Attributes | |
| App/Model | Dana 30 TJ, Dana 35 Standard |
| Axle Type | Dana 30, Dana 35 |
| California Proposition 65 | WARNING: Cancer - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Cover Bolt Quantity | 10 |
| Differential Carrier Break | 3.54 Ratio and Higher Rear (D35-411), 3.73 Ratio and Higher Front (D30-410TJ), 3.54 Ratio and Higher Rear (D35-411) |
| Differential Case Design Type | Dana 30, Dana 30 Front (D30-410TJ), Dana 35 Rear (D35-411), Dana 35 |
| Emission Code | Legal US |
| Front Differential Carrier | Open case 3.73 and up |
| Front Differential Carrier Break | Open case 3.73 and up |
| GTIN | 00698231959046 |
| Gear Ratio | 4.10, 4.1 |
| Harmonized Tariff Code (Schedule B) | 8708990011 |
| Hazardous Material Code | N |
| Life Cycle Status Code | Available to Order |
| NAFTA Preference Criterion Code | B |
| Pinion Gear Tooth Quantity | 10 Front (D30-410TJ), 9 Rear (D35-411) |
| Pinion Shaft Diameter | 1.376 |
| Pinion Spline Count | 26 |
| Position | Front Or Rear, Front and Rear |
| Ratio | 4.10 |
| Rear Differential Carrier | Open case 3.54 and up, Trac Lok 3.54 and up, Trac Lok 3.54 and up |
| Rear Differential Carrier Break | Open case 3.54 and up, Trac Lok 3.54 and up |
| Ring & Pinion Gear Ratio | 4.10 Front, 4.11 Rear |
| Ring Gear Bolt Quantity | 10 Front (D30-410TJ), 8 Rear (D35-411) |
| Ring Gear Diameter | 7.125 Front (D30-410TJ), 7.5 Rear (D35-411) |
| Ring Gear Material | 8620 Steel |
| Ring Gear Outside Diameter | 7.125 Front (D30-410TJ), 7.5 Rear (D35-411) |
| Ring Gear Rotation | Standard |
| Ring Gear Tooth Quantity | 37 Rear (D35-411), 41 Front (D30-410TJ) |
| Ring and Pinion Gear Ratio | 4.10 Front, 4.10 Front (D30-410TJ), 4.11 Rear (D35-411) |
| SDR Required Flag | N |
| Taxonomy | Differential LD |
| Taxonomy A | LD Differential |
| Taxonomy B | Ring and Pinion Gear Packages |
| Taxonomy C | Front and Rear |
| Taxonomy D | 4.10 |
| Warranty Time | 12 |
Motive Gear MGK-109 TJ NON-RUB DANA 30F/35R 4.10
Product Information
- Brand: Motive Gear
- Product Number: MGK-109