30 Spline Upgrade Kit; Dana 35; C-Clip; w/Auburn ECTED;
G2 Rear Axle Kits are made from high tensile alloy steels. These axles are forged and heat-treated for maximum strength. Big Spline options allow you to take advantage of even more added strength, gained from the larger diameter of the shafts. The larger diameter enables the shafts to withstand much higher torsional loads than the stock diameter. With either option, you can be assured that the weakest point of your driveline will not be your axle shafts.
G2 Rear Axle Kits are made from high tensile alloy steels. These axles are forged and heat-treated for maximum strength. Big Spline options allow you to take advantage of even more added strength, gained from the larger diameter of the shafts. The larger diameter enables the shafts to withstand much higher torsional loads than the stock diameter. With either option, you can be assured that the weakest point of your driveline will not be your axle shafts.
- Jeep rear axle kit
- Smooth street operation
- Includes:wheel bearings,seals and screw in wheel studs
- California Residents: WARNING
- Dana 35 C-Clip
- 30 spline
- 5-lug dual drilled 5x4.5/5.5
- For use in 91 and up YJ/XJ/TJ
- 89 and older must reuse factory retainer plates
- For use with 30 spline aftermarket differential
- Auburn Gear Locker is able to shift from limited slip to spool on the fly
- No additional parts needed
Information:
30 Spline Upgrade Kit; Dana 35; C-Clip; w/Auburn ECTED;Application Summary:
| Year | Make/Model |
|---|---|
| 1991-2001 | Jeep Cherokee |
| 1991-1995 | Jeep Wrangler |
| 1997-2006 | Jeep Wrangler |
This item is a package with the following components:
| Attributes | |
| AAP AgriculturalEquipment | N |
| AAP ApplicationSpecific | Y |
| AAP CarLightTruck | Y |
| AAP EngineSpecific | N |
| AAP FreightClass | 125 |
| AAP HeavyDutyTruck | N |
| AAP HighPerformance | N |
| AAP IndustrialOffHighwayEquipment | N |
| AAP Marine | N |
| AAP MediumDutyTruck | N |
| AAP MotorcycleOrATV | N |
| AAP NonVehicleSpecific | N |
| AAP PersonalWatercraft | N |
| AAP SellingPackageQty | 1 |
| AAP SellingPackageQtyUOM | EA |
| AAP SmallEngine | N |
| AAP Snowmobile | N |
| AAP TransmissionSpecific | N |
| Axle Nut Included | Yes, Yes |
| Axle Seal Included | Yes, Yes |
| Axle Type | Dana 35 |
| California Proposition 65 | WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Country of Origin (Primary) | US |
| Emission Code | Legal US |
| GTIN | 00631410153248 |
| Gasket Or Seal Included | Yes, Yes |
| Gear Ratio | N/A |
| Hardware Included | Yes, Yes |
| Harmonized Tariff Code (Schedule B) | 8708500000 |
| Hazardous Material Code | N |
| Length | 37 |
| Life Cycle Status Code | Available to Order |
| Mounting Hardware Included | Y |
| NAFTA Preference Criterion Code | B |
| Pinion Seal Included | Yes, Yes |
| SDR Required Flag | N |
| Warranty Time | 10 |
| Weight Capacity | 59.39 |
G2 Axle and Gear 96-2049-2-30AUB D35 C-CLIP 30 SPLINE UPGR W/AUBURN ECTED
Product Information
- Brand: G2 Axle and Gear
- Product Number: 96-2049-2-30AUB
This item is a package with the following components: 96-2049-2-30