RED CALIPER PAIR W/BRKT
PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!
- Electrostatic Powder Paint Resists Corrosion
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components Including Bleeder Screw Hardware And Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
Information:
Floating Caliper with Bracket
Application Summary:
| Year |
Make/Model |
| 2001-2010 |
Chrysler PT Cruiser |
| Attributes |
| Bleeder Screw Included |
Yes |
| Bleeder Screw Thread Diameter |
10mm |
| Bleeder Screw Thread Pitch |
1mm |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Caliper Casting Material |
Cast iron |
| Caliper Color |
Red |
| Caliper Piston Material |
Phenolic |
| Caliper Piston Quantity |
1 |
| Caliper Slides Included |
Yes |
| Caliper Type |
Floating |
| Country of Origin (Primary) |
CN |
| GTIN |
00889906388333 |
| Grade Type |
Performance |
| Harmonized Tariff Code (Schedule B) |
8708305090 |
| Hazardous Material Code |
N |
| Inlet Fitting Type |
Banjo |
| Inlet Thread Diameter |
10.00mm |
| Inlet Thread Pitch |
1.00mm |
| Inlet Thread Size |
M10 x 1.00mm |
| Instructions Included |
No |
| Life Cycle Status Code |
Available to Order |
| Mounting Bracket Included |
Yes |
| Mounting Hardware Included |
No |
| NAFTA Preference Criterion Code |
B |
| Piston Diameter |
56.90mm |
| Position |
Front |
| SDR Required Flag |
N |
| Warranty Time |
3 |
