DIRECT REPLACEMENT CALIPER
PowerStop's Autospecialty OE Replacement Brake Calipers (Sold Individually) bolt directly in place of the stock calipers. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop calipers are expertly assembled using new seals, caliper slide pins/bolts, dust boots, bleeder screws, and pad attachment hardware. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. PowerStop Autospecialty OE Replacement Brake Calipers are perfect for the budget conscious consumer looking for complete stock replacement brake calipers!
- 100 Percent Pressure Tested To Prevent Leaks
- Brand New Components
- Incl. Seals/boots/bleeder Screws/Hardware/Pins
- High Temperature EPDM Rubber For Extended Life
- Premium Silicone Lubrication For Smooth Operation
- Remanufactured In Our Chicago IL Facility
Information:
Floating Caliper without Bracket
Application Summary:
| Year |
Make/Model |
| 1994-1998 |
Jeep Grand Cherokee |
| Attributes |
| Abutment Clips Included |
No |
| Anti-Rattle Spring Included |
No |
| Bleeder Screw Included |
Yes |
| Bleeder Screw Thread Diameter |
0.375 in. |
| Bleeder Screw Thread Size |
3/8 x 24 |
| Bleeder Screw Threads Per Inch |
24 in. |
| Brake Pads Included |
No |
| California Proposition 65 |
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov |
| Caliper Casting Material |
Cast iron |
| Caliper Color |
Gray |
| Caliper Piston Material |
Steel |
| Caliper Piston Quantity |
1 |
| Caliper Slides Included |
No |
| Caliper Type |
Floating |
| Country of Origin (Primary) |
CN |
| GTIN |
00889906427414 |
| Grade Type |
Regular |
| Harmonized Tariff Code (Schedule B) |
8708305090 |
| Hazardous Material Code |
N |
| Inlet Thread Diameter |
0.375 in. |
| Inlet Thread Size |
3/8 x 24 in. |
| Life Cycle Status Code |
Available to Order |
| Mounting Bolt Included |
No |
| Mounting Bracket Included |
No |
| Mounting Hardware Included |
No |
| NAFTA Preference Criterion Code |
B |
| Pad Wear Sensor Included |
NO |
| Piston Diameter |
47.88mm |
| SDR Required Flag |
N |
| Warranty Time |
3 |
