Ford 6.4L Powerstroke Hot-Side Intercooler Pipe and Boot Kit, Custom Color
upgrade to the Mishimoto kit for increased reliability, durability, and performance. The Mishimoto Cold-Side Pipe is constructed of mandrel bent aluminum with a polished finish. The engineers at Mishimoto designed this kit to be a two piece pipe kit, compared to the factory one piece pipe, allowing for much easier installation and removal. The Mishimoto Hot-Side Pipe eliminates restrictive bends in the factory pipe, allowing for improvements in airflow, power, and EGTs. This kit includes Mishimoto silicone Boots with DuraCore technology. Mishimoto DuraCore technology is the synthetic material that comprises the innermost layer of all Mishimoto silicone Diesel Boots. Compared to normal silicone, DuraCore provides superior resistance to heat, pressure, fuel, and oil. This effectively increases the life of our boots by preventing leaks and blowouts. To add even more reliability this kit includes Mishimoto Constant-Tension T-bolt Clamps for accurate and consistent holding power. This hot-side pipe and boot kit is the perfect addition to the Mishimoto 6.4L Powerstroke Performance Intercooler and Mishimoto 6.4L Powerstroke Cold-Side Intercooler Pipe and Boot Kit. It is made in the USA and includes the Mishimoto Lifetime Warranty.
- Direct fit for the 6.4L Powerstroke
- 3-in mandrel-bent, polished aluminum pipe eliminates restrictive bends
- 2-piece design allows for easy removal and installation
- Provides improvement in airflow, power, and EGTs
- Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Constant-Tension T-bolt Clamps
- Mishimoto Lifetime Warranty
Application Summary:
| Year |
Make/Model |
| 2008-2010 |
Ford F-250 Super Duty |
| 2008-2010 |
Ford F-350 Super Duty |
| 2008-2010 |
Ford F-450 Super Duty |
| 2008-2010 |
Ford F-550 Super Duty |
| Attributes |
| Country of Origin (Primary) |
CN |
| GTIN |
00840197719152 |
| Hazardous Material Code |
N |
| Install Difficulty |
N/A |
| Life Cycle Status Code |
Available to Order |
| NAFTA Preference Criterion Code |
B |
| SDR Required Flag |
N |
| SellingPoint01 |
Direct fit for the 6.4L Powerstroke |
| SellingPoint02 |
Available in 21 different custom powder coated colors, including 5 OEM equivalent colors |
| SellingPoint03 |
3-in mandrel-bent, polished aluminum pipe eliminates restrictive bends |
| SellingPoint04 |
2-piece design allows for easy removal and installation |
| SellingPoint05 |
Provides improvement in airflow, power, and EGTs |
| SellingPoint06 |
Includes Mishimoto Silicone Boots with DuraCore technology and Mishimoto Constant-Tension T-bolt Clamps |
| SellingPoint07 |
Please allow up to 20 days for shipping. Custom Color Collection purchases are powder coated after your order is placed |
| SellingPoint08 |
Mishimoto Lifetime Warranty |
| SellingPoint09 |
N/A |
| SellingPoint10 |
N/A |
| SellingPoint11 |
N/A |
| SellingPoint12 |
N/A |
| SellingPoint13 |
N/A |
| SellingPoint14 |
N/A |
| SellingPoint15 |
N/A |
| TechSpec Applications |
2008-2010 Ford F-250 w/ 6.4L Powerstroke--2008-2010 Ford F-350 w/ 6.4L Powerstroke--2008-2010 Ford F-450 w/ 6.4L Powerstroke--2008-2010 Ford F-550 w/ 6.4L Powerstroke |
| TechSpec Centerline Radius |
N/A |
| TechSpec Chassis Codes |
N/A |
| TechSpec Core Height (in) |
N/A |
| TechSpec Core Length (in) |
N/A |
| TechSpec Core Thickness (in) |
N/A |
| TechSpec Core Type |
N/A |
| TechSpec Engine Codes |
N/A |
| TechSpec Includes |
(2) Aluminum Intercooler Pipes--(3) Silicone Boots with DuraCore Technology--(6) Constant-Tension T-Bolt Clamps--(2) Aluminum Mishimoto M Logo Badges--Mishimoto Lifetime Warranty |
| TechSpec Inlet (in) |
N/A |
| TechSpec Installation Notes |
N/A |
| TechSpec Maximum Recommended Boost Pressure (PSI) |
N/A |
| TechSpec Maximum Recommended Horsepower |
N/A |
| TechSpec Note |
Each individual order is powder coated on demand, therefore there will be an extended timeframe (Up to 20 days) between order placement and actual shipment. Tracking information will be provided upon order shipment after coating. Please review your color selection carefully and contact us immediately at 1.877.GOMISHI if you need to make changes to your order. Any changes to your order must be made within 1 business day of the original order.----Returns will not be accepted on any items within our Custom Finish program.----All "OEM Color Equivalent" finishes have been carefully selected by our team. These coatings are not exact matches due to differences between powder coat and liquid paint. Our team has verified that the color equivalents we offer are a very close match to the OEM paint. |
| TechSpec Outlet (in) |
N/A |
| TechSpec Overall Height (in) |
N/A |
| TechSpec Overall Length (in) |
N/A |
| TechSpec Overall Width (in) |
N/A |
| TechSpec Pipe Diameter |
N/A |
| TechSpec Pipe Length |
N/A |
| TechSpec Pipe Shape |
N/A |
| TechSpec Weight (lbs) |
N/A |
